File Upload with traditional ASP

Hi, apologies if this has already been covered but my search came up a blank.

I am relativley novice to FCK and am having problems getting images and documents to upload to the relevant folder in the userfiles folder.

For example when i use the upload option on the image button it goes straight into the userfiles folder rather than the userfiles/images folder

This is my connector code, i have tried altering the values for QuickUploadPath but every time i do I get an XML error.

<%
 ' FCKeditor - The text editor for Internet - http://www.fckeditor.net
 ' Copyright (C) 2003-2008 Frederico Caldeira Knabben
 '
 ' == BEGIN LICENSE ==
 '
 ' Licensed under the terms of any of the following licenses at your
 ' choice:
 '
 '  - GNU General Public License Version 2 or later (the "GPL")
 '    http://www.gnu.org/licenses/gpl.html
 '
 '  - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
 '    http://www.gnu.org/licenses/lgpl.html
 '
 '  - Mozilla Public License Version 1.1 or later (the "MPL")
 '    http://www.mozilla.org/MPL/MPL-1.1.html
 '
 ' == END LICENSE ==
 '
 ' Configuration file for the File Manager Connector for ASP.
%>
<%

' SECURITY: You must explicitly enable this "connector" (set it to "True").
' WARNING: don't just set "ConfigIsEnabled = true", you must be sure that only
'      authenticated users can access this file or use some kind of session checking.
Dim ConfigIsEnabled
ConfigIsEnabled = True

' Path to user files relative to the document root.
' This setting is preserved only for backward compatibility.
' You should look at the settings for each resource type to get the full potential
Dim ConfigUserFilesPath
ConfigUserFilesPath = "/userfiles/"

' Due to security issues with Apache modules, it is recommended to leave the
' following setting enabled.
Dim ConfigForceSingleExtension
ConfigForceSingleExtension = true

' What the user can do with this connector
Dim ConfigAllowedCommands
ConfigAllowedCommands = "QuickUpload|FileUpload|GetFolders|GetFoldersAndFiles|CreateFolder"

' Allowed Resource Types
Dim ConfigAllowedTypes
ConfigAllowedTypes = "File|Image|Flash|Media"

' For security, HTML is allowed in the first Kb of data for files having the
' following extensions only.
Dim ConfigHtmlExtensions
ConfigHtmlExtensions = "html|htm|xml|xsd|txt|js"
'
'   Configuration settings for each Resource Type
'
'   - AllowedExtensions: the possible extensions that can be allowed.
'      If it is empty then any file type can be uploaded.
'
'   - DeniedExtensions: The extensions that won't be allowed.
'      If it is empty then no restrictions are done here.
'
'   For a file to be uploaded it has to fulfill both the AllowedExtensions
'   and DeniedExtensions (that's it: not being denied) conditions.
'
'   - FileTypesPath: the virtual folder relative to the document root where
'      these resources will be located.
'      Attention: It must start and end with a slash: '/'
'
'   - FileTypesAbsolutePath: the physical path to the above folder. It must be
'      an absolute path.
'      If it's an empty string then it will be autocalculated.
'      Useful if you are using a virtual directory, symbolic link or alias.
'      Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
'      Attention: The above 'FileTypesPath' must point to the same directory.
'      Attention: It must end with a slash: '/'
'
' - QuickUploadPath: the virtual folder relative to the document root where
'      these resources will be uploaded using the Upload tab in the resources
'      dialogs.
'      Attention: It must start and end with a slash: '/'
'
'    - QuickUploadAbsolutePath: the physical path to the above folder. It must be
'      an absolute path.
'      If it's an empty string then it will be autocalculated.
'      Useful if you are using a virtual directory, symbolic link or alias.
'      Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
'      Attention: The above 'QuickUploadPath' must point to the same directory.
'      Attention: It must end with a slash: '/'
'

Dim ConfigAllowedExtensions, ConfigDeniedExtensions, ConfigFileTypesPath, ConfigFileTypesAbsolutePath, ConfigQuickUploadPath, ConfigQuickUploadAbsolutePath
Set ConfigAllowedExtensions   = CreateObject( "Scripting.Dictionary" )
Set ConfigDeniedExtensions   = CreateObject( "Scripting.Dictionary" )
Set ConfigFileTypesPath   = CreateObject( "Scripting.Dictionary" )
Set ConfigFileTypesAbsolutePath   = CreateObject( "Scripting.Dictionary" )
Set ConfigQuickUploadPath   = CreateObject( "Scripting.Dictionary" )
Set ConfigQuickUploadAbsolutePath   = CreateObject( "Scripting.Dictionary" )

ConfigAllowedExtensions.Add   "File", "7z|aiff|asf|avi|bmp|csv|doc|fla|flv|gif|gz|gzip|jpeg|jpg|mid|mov|mp3|mp4|mpc|mpeg|mpg|ods|odt|pdf|png|ppt|pxd|qt|ram|rar|rm|rmi|rmvb|rtf|sdc|sitd|swf|sxc|sxw|tar|tgz|tif|tiff|txt|vsd|wav|wma|wmv|xls|xml|zip"
ConfigDeniedExtensions.Add   "File", ""
ConfigFileTypesPath.Add "File", ConfigUserFilesPath & "file/"
ConfigFileTypesAbsolutePath.Add "File", ""
ConfigQuickUploadPath.Add "File", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "File", ""

ConfigAllowedExtensions.Add   "Image", "bmp|gif|jpeg|jpg|png"
ConfigDeniedExtensions.Add   "Image", ""
ConfigFileTypesPath.Add "Image", ConfigUserFilesPath & "image/"
ConfigFileTypesAbsolutePath.Add "Image", ""
ConfigQuickUploadPath.Add "Image", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Image", ""

ConfigAllowedExtensions.Add   "Flash", "swf|flv"
ConfigDeniedExtensions.Add   "Flash", ""
ConfigFileTypesPath.Add "Flash", ConfigUserFilesPath & "flash/"
ConfigFileTypesAbsolutePath.Add "Flash", ""
ConfigQuickUploadPath.Add "Flash", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Flash", ""

ConfigAllowedExtensions.Add   "Media", "aiff|asf|avi|bmp|fla|flv|gif|jpeg|jpg|mid|mov|mp3|mp4|mpc|mpeg|mpg|png|qt|ram|rm|rmi|rmvb|swf|tif|tiff|wav|wma|wmv"
ConfigDeniedExtensions.Add   "Media", ""
ConfigFileTypesPath.Add "Media", ConfigUserFilesPath & "media/"
ConfigFileTypesAbsolutePath.Add "Media", ""
ConfigQuickUploadPath.Add "Media", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Media", ""

%>