I have the editor working great in YAF 1.9.1.8 (in a DNN 4.7 install), except for one little wierd problem. The add/insert image button works like I would expect it to, but if you try to use the browse server button, I get an error about the config file for PHP. Found the file, marked it as True for use like it says, and still have trouble. Here is where I am at so far with it....
_________________________________________
global $Config ;
// SECURITY: You must explicitly enable this "connector". (Set it to "true".
// WARNING: don't just set "$Config['Enabled'] = true ;", you must be sure that only
// authenticated users can access this file or use some kind of session checking.
$Config['Enabled'] = true ; //I marked this as true
// Path to user files relative to the document root.
//$Config['UserFilesPath'] = '/userfiles/' ; what was originally there...
$Config['UserFilesPath'] = 'd:inetpub\\www.northstarcamaroclub.net\\portals\\0\\forum\\' ;
// I cannot seem to get this line correct, nor the config['userfilesabsolutepath']
// Fill the following value it you prefer to specify the absolute path for the
// user files directory. Useful if you are using a virtual directory, symbolic
// link or alias. Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
// Attention: The above 'UserFilesPath' must point to the same directory.
$Config['UserFilesAbsolutePath'] = '//' ;
// I would prefer to use the virtual, I just can't seem to get it to work!!!!
// Due to security issues with Apache modules, it is recommended to leave the
// following setting enabled.
$Config['ForceSingleExtension'] = true ;
// Perform additional checks for image files.
// If set to true, validate image size (using getimagesize).
$Config['SecureImageUploads'] = true;
// What the user can do with this connector.
$Config['ConfigAllowedCommands'] = array('QuickUpload', 'FileUpload', 'GetFolders', 'GetFoldersAndFiles', 'CreateFolder') ;
// Allowed Resource Types.
$Config['ConfigAllowedTypes'] = array('File', 'Image', 'Flash', 'Media') ;
// For security, HTML is allowed in the first Kb of data for files having the
// following extensions only.
$Config['HtmlExtensions'] = array("html", "htm", "xml", "xsd", "txt", "js" ;
// After file is uploaded, sometimes it is required to change its permissions
// so that it was possible to access it at the later time.
// If possible, it is recommended to set more restrictive permissions, like 0755.
// Set to 0 to disable this feature.
// Note: not needed on Windows-based servers.
$Config['ChmodOnUpload'] = 0777 ;
// See comments above.
// Used when creating folders that does not exist.
$Config['ChmodOnFolderCreate'] = 0777 ;
/*
Configuration settings for each Resource Type
- AllowedExtensions: the possible extensions that can be allowed.
If it is empty then any file type can be uploaded.
- DeniedExtensions: The extensions that won't be allowed.
If it is empty then no restrictions are done here.
For a file to be uploaded it has to fulfill both the AllowedExtensions
and DeniedExtensions (that's it: not being denied) conditions.
- FileTypesPath: the virtual folder relative to the document root where
these resources will be located.
Attention: It must start and end with a slash: '/'
- FileTypesAbsolutePath: the physical path to the above folder. It must be
an absolute path.
If it's an empty string then it will be autocalculated.
Useful if you are using a virtual directory, symbolic link or alias.
Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
Attention: The above 'FileTypesPath' must point to the same directory.
Attention: It must end with a slash: '/'
- QuickUploadPath: the virtual folder relative to the document root where
these resources will be uploaded using the Upload tab in the resources
dialogs.
Attention: It must start and end with a slash: '/'
- QuickUploadAbsolutePath: the physical path to the above folder. It must be
an absolute path.
If it's an empty string then it will be autocalculated.
Useful if you are using a virtual directory, symbolic link or alias.
Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
Attention: The above 'QuickUploadPath' must point to the same directory.
Attention: It must end with a slash: '/'
NOTE: by default, QuickUploadPath and QuickUploadAbsolutePath point to
"userfiles" directory to maintain backwards compatibility with older versions of FCKeditor.
This is fine, but you in some cases you will be not able to browse uploaded files using file browser.
Example: if you click on "image button", select "Upload" tab and send image
to the server, image will appear in FCKeditor correctly, but because it is placed
directly in /userfiles/ directory, you'll be not able to see it in built-in file browser.
The more expected behaviour would be to send images directly to "image" subfolder.
To achieve that, simply change
$Config['QuickUploadPath']['Image'] = $Config['UserFilesPath'] ;
$Config['QuickUploadAbsolutePath']['Image'] = $Config['UserFilesAbsolutePath'] ;
into:
$Config['QuickUploadPath']['Image'] = $Config['FileTypesPath']['Image'] ;
$Config['QuickUploadAbsolutePath']['Image'] = $Config['FileTypesAbsolutePath']['Image'] ;
*/
$Config['AllowedExtensions']['File'] = array('7z', 'aiff', 'asf', 'avi', 'bmp', 'csv', 'doc', 'fla', 'flv', 'gif', 'gz', 'gzip', 'jpeg', 'jpg', 'mid', 'mov', 'mp3', 'mp4', 'mpc', 'mpeg', 'mpg', 'ods', 'odt', 'pdf', 'png', 'ppt', 'pxd', 'qt', 'ram', 'rar', 'rm', 'rmi', 'rmvb', 'rtf', 'sdc', 'sitd', 'swf', 'sxc', 'sxw', 'tar', 'tgz', 'tif', 'tiff', 'txt', 'vsd', 'wav', 'wma', 'wmv', 'xls', 'xml', 'zip') ;
$Config['DeniedExtensions']['File'] = array() ;
$Config['FileTypesPath']['File'] = $Config['UserFilesPath'] . 'file/' ;
$Config['FileTypesAbsolutePath']['File']= ($Config['UserFilesAbsolutePath'] == '') ? '' : $Config['UserFilesAbsolutePath'].'file/' ;
$Config['QuickUploadPath']['File'] = $Config['UserFilesPath'] ;
$Config['QuickUploadAbsolutePath']['File']= $Config['UserFilesAbsolutePath'] ;
$Config['AllowedExtensions']['Image'] = array('bmp','gif','jpeg','jpg','png') ;
$Config['DeniedExtensions']['Image'] = array() ;
$Config['FileTypesPath']['Image'] = $Config['UserFilesPath'] . 'image/' ;
$Config['FileTypesAbsolutePath']['Image']= ($Config['UserFilesAbsolutePath'] == '') ? '' : $Config['UserFilesAbsolutePath'].'image/' ;
$Config['QuickUploadPath']['Image'] = $Config['UserFilesPath'] ;
$Config['QuickUploadAbsolutePath']['Image']= $Config['UserFilesAbsolutePath'] ;
$Config['AllowedExtensions']['Flash'] = array('swf','flv') ;
$Config['DeniedExtensions']['Flash'] = array() ;
$Config['FileTypesPath']['Flash'] = $Config['UserFilesPath'] . 'flash/' ;
$Config['FileTypesAbsolutePath']['Flash']= ($Config['UserFilesAbsolutePath'] == '') ? '' : $Config['UserFilesAbsolutePath'].'flash/' ;
$Config['QuickUploadPath']['Flash'] = $Config['UserFilesPath'] ;
$Config['QuickUploadAbsolutePath']['Flash']= $Config['UserFilesAbsolutePath'] ;
$Config['AllowedExtensions']['Media'] = array('aiff', 'asf', 'avi', 'bmp', 'fla', 'flv', 'gif', 'jpeg', 'jpg', 'mid', 'mov', 'mp3', 'mp4', 'mpc', 'mpeg', 'mpg', 'png', 'qt', 'ram', 'rm', 'rmi', 'rmvb', 'swf', 'tif', 'tiff', 'wav', 'wma', 'wmv') ;
$Config['DeniedExtensions']['Media'] = array() ;
$Config['FileTypesPath']['Media'] = $Config['UserFilesPath'] . 'media/' ;
$Config['FileTypesAbsolutePath']['Media']= ($Config['UserFilesAbsolutePath'] == '') ? '' : $Config['UserFilesAbsolutePath'].'media/' ;
$Config['QuickUploadPath']['Media'] = $Config['UserFilesPath'] ;
$Config['QuickUploadAbsolutePath']['Media']= $Config['UserFilesAbsolutePath'] ;
?>
_________________________________________
I am no programmer by any stretch, but I have tried several times to get the user file structure worked out, and finally have gone to the absolute file structure, and still no joy... With the settings as shown, I get no error, but the thing doesn't seem to actually point anywhere, it shows no images, it pretends to upload images, and if I use the create folder option, it says I don't have permission to do that. The website is http://www.northstarcamaroclub.net , you can use jsmith 1234567 to login. Goto the forum and make a post, if you try to use the add image button and then use the browse server button, it doesn't work. Any help greatly appreciated...
Thu, 04/24/2008 - 20:41
#1
Re: Editor configuration help needed!
Re: Editor configuration help needed!
Re: Editor configuration help needed!
It worked!!!!! I may not really understand what I am doing, but I got it to work, and even got the color scheme and buttons I wanted. Thanks for leaving remarks in the code, that really helps!
Below are my FCKconfig.js and my config.asp in case it helps anyone else.
Here is my fckconfig.js....
/*
* FCKeditor - The text editor for Internet - http://www.fckeditor.net
* Copyright (C) 2003-2008 Frederico Caldeira Knabben
*
* == BEGIN LICENSE ==
*
* Licensed under the terms of any of the following licenses at your
* choice:
*
* - GNU General Public License Version 2 or later (the "GPL")
* http://www.gnu.org/licenses/gpl.html
*
* - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
* http://www.gnu.org/licenses/lgpl.html
*
* - Mozilla Public License Version 1.1 or later (the "MPL")
* http://www.mozilla.org/MPL/MPL-1.1.html
*
* == END LICENSE ==
*
* Editor configuration settings.
*
* Follow this link for more information:
* http://wiki.fckeditor.net/Developer%27s ... s_Settings
*/
FCKConfig.CustomConfigurationsPath = '' ;
FCKConfig.EditorAreaCSS = FCKConfig.BasePath + 'css/fck_editorarea.css' ;
FCKConfig.EditorAreaStyles = '' ;
FCKConfig.ToolbarComboPreviewCSS = '' ;
FCKConfig.DocType = '' ;
FCKConfig.BaseHref = '' ;
FCKConfig.FullPage = false ;
// The following option determines whether the "Show Blocks" feature is enabled or not at startup.
FCKConfig.StartupShowBlocks = false ;
FCKConfig.Debug = false ;
FCKConfig.AllowQueryStringDebug = true ;
//changed the skin here!!!!!!!!!!!!!!!
FCKConfig.SkinPath = FCKConfig.BasePath + 'skins/silver/' ;
FCKConfig.SkinEditorCSS = '' ; // FCKConfig.SkinPath + "|<minified css>" ;
FCKConfig.SkinDialogCSS = '' ; // FCKConfig.SkinPath + "|<minified css>" ;
FCKConfig.PreloadImages = [ FCKConfig.SkinPath + 'images/toolbar.start.gif', FCKConfig.SkinPath + 'images/toolbar.buttonarrow.gif' ] ;
FCKConfig.PluginsPath = FCKConfig.BasePath + 'plugins/' ;
// FCKConfig.Plugins.Add( 'autogrow' ) ;
// FCKConfig.Plugins.Add( 'dragresizetable' );
FCKConfig.AutoGrowMax = 400 ;
// FCKConfig.ProtectedSource.Add( /<%[\s\S]*?%>/g ) ; // ASP style server side code <%...%>
// FCKConfig.ProtectedSource.Add( /<\?[\s\S]*?\?>/g ) ; // PHP style server side code
// FCKConfig.ProtectedSource.Add( /(<asp:[^\>]+>[\s|\S]*?<\/asp:[^\>]+>)|(<asp:[^\>]+\/>)/gi ) ; // ASP.Net style tags <asp:control>
FCKConfig.AutoDetectLanguage = true ;
FCKConfig.DefaultLanguage = 'en' ;
FCKConfig.ContentLangDirection = 'ltr' ;
FCKConfig.ProcessHTMLEntities = true ;
FCKConfig.IncludeLatinEntities = true ;
FCKConfig.IncludeGreekEntities = true ;
FCKConfig.ProcessNumericEntities = false ;
FCKConfig.AdditionalNumericEntities = '' ; // Single Quote: "'"
FCKConfig.FillEmptyBlocks = true ;
//changed to false on formatsource nad formatoutput
FCKConfig.FormatSource = false ;
FCKConfig.FormatOutput = false ;
FCKConfig.FormatIndentator = ' ' ;
FCKConfig.StartupFocus = false ;
FCKConfig.ForcePasteAsPlainText = false ;
FCKConfig.AutoDetectPasteFromWord = true ; // IE only.
FCKConfig.ShowDropDialog = true ;
FCKConfig.ForceSimpleAmpersand = false ;
FCKConfig.TabSpaces = 0 ;
FCKConfig.ShowBorders = true ;
FCKConfig.SourcePopup = false ;
FCKConfig.ToolbarStartExpanded = true ;
//toolbar expand to false
FCKConfig.ToolbarCanCollapse = false ;
FCKConfig.IgnoreEmptyParagraphValue = true ;
FCKConfig.PreserveSessionOnFileBrowser = false ;
FCKConfig.FloatingPanelsZIndex = 10000 ;
FCKConfig.HtmlEncodeOutput = false ;
FCKConfig.TemplateReplaceAll = true ;
FCKConfig.TemplateReplaceCheckbox = true ;
FCKConfig.ToolbarLocation = 'In' ;
//FCKConfig.ToolbarSets["Default"] = [
// ['Source','DocProps','-','Save','NewPage','Preview','-','Templates'],
// ['Cut','Copy','Paste','PasteText','PasteWord','-','Print','SpellCheck'],
// ['Undo','Redo','-','Find','Replace','-','SelectAll','RemoveFormat'],
// ['Form','Checkbox','Radio','TextField','Textarea','Select','Button','ImageButton','HiddenField'],
// '/',
// ['Bold','Italic','Underline','StrikeThrough','-','Subscript','Superscript'],
// ['OrderedList','UnorderedList','-','Outdent','Indent','Blockquote'],
// ['JustifyLeft','JustifyCenter','JustifyRight','JustifyFull'],
// ['Link','Unlink','Anchor'],
// ['Image','Flash','Table','Rule','Smiley','SpecialChar','PageBreak'],
// '/',
// ['Style','FontFormat','FontName','FontSize'],
// ['TextColor','BGColor'],
// ['FitWindow','ShowBlocks','-','About'] // No comma for the last row.
//] ;
//FCKConfig.ToolbarSets["Default"] = [
// //['Source','DocProps','-','Save','NewPage','Preview','-','Templates'],
// ['Cut','Copy','Paste','PasteText','PasteWord','-','Print','SpellCheck'],
// ['Undo','Redo','-','Find','Replace','-','SelectAll','RemoveFormat'],
// //['Form','Checkbox','Radio','TextField','Textarea','Select','Button','ImageButton','HiddenField'],
// '/',
// ['Bold','Italic','Underline','StrikeThrough','-','Subscript','Superscript'],
// ['OrderedList','UnorderedList','-','Outdent','Indent'],
// ['JustifyLeft','JustifyCenter','JustifyRight','JustifyFull'],
// ['Link','Unlink','Anchor'],
// ['Image','Table','Rule','Smiley','SpecialChar'],
// '/',
// ['Style','FontFormat','FontName','FontSize'],
// ['TextColor','BGColor'],
// ['FitWindow','About'] // No comma for the last row.
//] ;
FCKConfig.ToolbarSets["Default"] = [
//['Source','DocProps','-','Save','NewPage','Preview','-','Templates'],
['Cut','Copy','Paste','PasteText','PasteWord','-','Print','SpellCheck'],
['Undo','Redo','-','Find','Replace','-','SelectAll','RemoveFormat'],
//['Form','Checkbox','Radio','TextField','Textarea','Select','Button','ImageButton','HiddenField'],
'/',
['Bold','Italic','Underline','StrikeThrough','-','Subscript','Superscript'],
['OrderedList','UnorderedList','-','Outdent','Indent'],
['JustifyLeft','JustifyCenter','JustifyRight','JustifyFull'],
['Link','Unlink','Anchor'],
['Image','Table','Rule','Smiley','SpecialChar'],['TextColor','BGColor'],
['FitWindow','About'],
'/',
['Style','FontFormat','FontName','FontSize']
// No comma for the last row.
] ;
FCKConfig.ToolbarSets["Basic"] = [
['Bold','Italic','-','OrderedList','UnorderedList','-','Link','Unlink','-','About']
] ;
FCKConfig.EnterMode = 'p' ; // p | div | br
FCKConfig.ShiftEnterMode = 'br' ; // p | div | br
FCKConfig.Keystrokes = [
[ CTRL + 65 /*A*/, true ],
[ CTRL + 67 /*C*/, true ],
[ CTRL + 70 /*F*/, true ],
[ CTRL + 83 /*S*/, true ],
[ CTRL + 84 /*T*/, true ],
[ CTRL + 88 /*X*/, true ],
[ CTRL + 86 /*V*/, 'Paste' ],
[ SHIFT + 45 /*INS*/, 'Paste' ],
[ CTRL + 88 /*X*/, 'Cut' ],
[ SHIFT + 46 /*DEL*/, 'Cut' ],
[ CTRL + 90 /*Z*/, 'Undo' ],
[ CTRL + 89 /*Y*/, 'Redo' ],
[ CTRL + SHIFT + 90 /*Z*/, 'Redo' ],
[ CTRL + 76 /*L*/, 'Link' ],
[ CTRL + 66 /*B*/, 'Bold' ],
[ CTRL + 73 /*I*/, 'Italic' ],
[ CTRL + 85 /*U*/, 'Underline' ],
[ CTRL + SHIFT + 83 /*S*/, 'Save' ],
[ CTRL + ALT + 13 /*ENTER*/, 'FitWindow' ]
] ;
FCKConfig.ContextMenu = ['Generic','Link','Anchor','Image','Flash','Select','Textarea','Checkbox','Radio','TextField','HiddenField','ImageButton','Button','BulletedList','NumberedList','Table','Form'] ;
FCKConfig.BrowserContextMenuOnCtrl = false ;
FCKConfig.EnableMoreFontColors = true ;
FCKConfig.FontColors = '000000,993300,333300,003300,003366,000080,333399,333333,800000,FF6600,808000,808080,008080,0000FF,666699,808080,FF0000,FF9900,99CC00,339966,33CCCC,3366FF,800080,999999,FF00FF,FFCC00,FFFF00,00FF00,00FFFF,00CCFF,993366,C0C0C0,FF99CC,FFCC99,FFFF99,CCFFCC,CCFFFF,99CCFF,CC99FF,FFFFFF' ;
FCKConfig.FontFormats = 'p;h1;h2;h3;h4;h5;h6;pre;address;div' ;
FCKConfig.FontNames = 'Arial;Comic Sans MS;Courier New;Tahoma;Times New Roman;Verdana' ;
FCKConfig.FontSizes = 'smaller;larger;xx-small;x-small;small;medium;large;x-large;xx-large' ;
FCKConfig.StylesXmlPath = FCKConfig.EditorPath + 'fckstyles.xml' ;
FCKConfig.TemplatesXmlPath = FCKConfig.EditorPath + 'fcktemplates.xml' ;
FCKConfig.SpellChecker = 'ieSpell' ; // 'ieSpell' | 'SpellerPages'
FCKConfig.IeSpellDownloadUrl = 'http://www.iespell.com/download.php' ;
FCKConfig.SpellerPagesServerScript = 'server-scripts/spellchecker.php' ; // Available extension: .php .cfm .pl
FCKConfig.FirefoxSpellChecker = false ;
FCKConfig.MaxUndoLevels = 15 ;
FCKConfig.DisableObjectResizing = false ;
FCKConfig.DisableFFTableHandles = true ;
FCKConfig.LinkDlgHideTarget = false ;
FCKConfig.LinkDlgHideAdvanced = false ;
FCKConfig.ImageDlgHideLink = false ;
FCKConfig.ImageDlgHideAdvanced = false ;
FCKConfig.FlashDlgHideAdvanced = false ;
FCKConfig.ProtectedTags = '' ;
// This will be applied to the body element of the editor
FCKConfig.BodyId = '' ;
FCKConfig.BodyClass = '' ;
FCKConfig.DefaultStyleLabel = '' ;
FCKConfig.DefaultFontFormatLabel = '' ;
FCKConfig.DefaultFontLabel = '' ;
FCKConfig.DefaultFontSizeLabel = '' ;
FCKConfig.DefaultLinkTarget = '' ;
// The option switches between trying to keep the html structure or do the changes so the content looks like it was in Word
FCKConfig.CleanWordKeepsStructure = false ;
// Only inline elements are valid.
FCKConfig.RemoveFormatTags = 'b,big,code,del,dfn,em,font,i,ins,kbd,q,samp,small,span,strike,strong,sub,sup,tt,u,var' ;
// Attributes that will be removed
FCKConfig.RemoveAttributes = 'class,style,lang,width,height,align,hspace,valign' ;
FCKConfig.CustomStyles =
{
'Red Title' : { Element : 'h3', Styles : { 'color' : 'Red' } }
};
// Do not add, rename or remove styles here. Only apply definition changes.
FCKConfig.CoreStyles =
{
// Basic Inline Styles.
'Bold' : { Element : 'strong', Overrides : 'b' },
'Italic' : { Element : 'em', Overrides : 'i' },
'Underline' : { Element : 'u' },
'StrikeThrough' : { Element : 'strike' },
'Subscript' : { Element : 'sub' },
'Superscript' : { Element : 'sup' },
// Basic Block Styles (Font Format Combo).
'p' : { Element : 'p' },
'div' : { Element : 'div' },
'pre' : { Element : 'pre' },
'address' : { Element : 'address' },
'h1' : { Element : 'h1' },
'h2' : { Element : 'h2' },
'h3' : { Element : 'h3' },
'h4' : { Element : 'h4' },
'h5' : { Element : 'h5' },
'h6' : { Element : 'h6' },
// Other formatting features.
'FontFace' :
{
Element : 'span',
Styles : { 'font-family' : '#("Font")' },
Overrides : [ { Element : 'font', Attributes : { 'face' : null } } ]
},
'Size' :
{
Element : 'span',
Styles : { 'font-size' : '#("Size","fontSize")' },
Overrides : [ { Element : 'font', Attributes : { 'size' : null } } ]
},
'Color' :
{
Element : 'span',
Styles : { 'color' : '#("Color","color")' },
Overrides : [ { Element : 'font', Attributes : { 'color' : null } } ]
},
'BackColor' : { Element : 'span', Styles : { 'background-color' : '#("Color","color")' } },
'SelectionHighlight' : { Element : 'span', Styles : { 'background-color' : 'navy', 'color' : 'white' } }
};
// The distance of an indentation step.
FCKConfig.IndentLength = 40 ;
FCKConfig.IndentUnit = 'px' ;
// Alternatively, FCKeditor allows the use of CSS classes for block indentation.
// This overrides the IndentLength/IndentUnit settings.
FCKConfig.IndentClasses = [] ;
// [ Left, Center, Right, Justified ]
FCKConfig.JustifyClasses = [] ;
// The following value defines which File Browser connector and Quick Upload
// "uploader" to use. It is valid for the default implementaion and it is here
// just to make this configuration file cleaner.
// It is not possible to change this value using an external file or even
// inline when creating the editor instance. In that cases you must set the
// values of LinkBrowserURL, ImageBrowserURL and so on.
// Custom implementations should just ignore it.
var _FileBrowserLanguage = 'asp' ; // asp | aspx | cfm | lasso | perl | php | py was php_________
var _QuickUploadLanguage = 'asp' ; // asp | aspx | cfm | lasso | perl | php | py was php_________
// Don't care about the following two lines. It just calculates the correct connector
// extension to use for the default File Browser (Perl uses "cgi").
var _FileBrowserExtension = _FileBrowserLanguage == 'perl' ? 'cgi' : _FileBrowserLanguage ;
var _QuickUploadExtension = _QuickUploadLanguage == 'perl' ? 'cgi' : _QuickUploadLanguage ;
FCKConfig.LinkBrowser = true ;
FCKConfig.LinkBrowserURL = FCKConfig.BasePath + 'filemanager/browser/default/browser.html?Connector=' + encodeURIComponent( FCKConfig.BasePath + 'filemanager/connectors/' + _FileBrowserLanguage + '/connector.' + _FileBrowserExtension ) ;
FCKConfig.LinkBrowserWindowWidth = FCKConfig.ScreenWidth * 0.7 ; // 70%
FCKConfig.LinkBrowserWindowHeight = FCKConfig.ScreenHeight * 0.7 ; // 70%
FCKConfig.ImageBrowser = true ;
FCKConfig.ImageBrowserURL = FCKConfig.BasePath + 'filemanager/browser/default/browser.html?Type=Image&Connector=' + encodeURIComponent( FCKConfig.BasePath + 'filemanager/connectors/' + _FileBrowserLanguage + '/connector.' + _FileBrowserExtension ) ;
FCKConfig.ImageBrowserWindowWidth = FCKConfig.ScreenWidth * 0.7 ; // 70% ;
FCKConfig.ImageBrowserWindowHeight = FCKConfig.ScreenHeight * 0.7 ; // 70% ;
FCKConfig.FlashBrowser = true ;
FCKConfig.FlashBrowserURL = FCKConfig.BasePath + 'filemanager/browser/default/browser.html?Type=Flash&Connector=' + encodeURIComponent( FCKConfig.BasePath + 'filemanager/connectors/' + _FileBrowserLanguage + '/connector.' + _FileBrowserExtension ) ;
FCKConfig.FlashBrowserWindowWidth = FCKConfig.ScreenWidth * 0.7 ; //70% ;
FCKConfig.FlashBrowserWindowHeight = FCKConfig.ScreenHeight * 0.7 ; //70% ;
FCKConfig.LinkUpload = true ;
FCKConfig.LinkUploadURL = FCKConfig.BasePath + 'filemanager/connectors/' + _QuickUploadLanguage + '/upload.' + _QuickUploadExtension ;
FCKConfig.LinkUploadAllowedExtensions = ".(7z|aiff|asf|avi|bmp|csv|doc|fla|flv|gif|gz|gzip|jpeg|jpg|mid|mov|mp3|mp4|mpc|mpeg|mpg|ods|odt|pdf|png|ppt|pxd|qt|ram|rar|rm|rmi|rmvb|rtf|sdc|sitd|swf|sxc|sxw|tar|tgz|tif|tiff|txt|vsd|wav|wma|wmv|xls|xml|zip)$" ; // empty for all
FCKConfig.LinkUploadDeniedExtensions = "" ; // empty for no one
FCKConfig.ImageUpload = true ;
FCKConfig.ImageUploadURL = FCKConfig.BasePath + 'filemanager/connectors/' + _QuickUploadLanguage + '/upload.' + _QuickUploadExtension + '?Type=Image' ;
FCKConfig.ImageUploadAllowedExtensions = ".(jpg|gif|jpeg|png|bmp)$" ; // empty for all
FCKConfig.ImageUploadDeniedExtensions = "" ; // empty for no one
FCKConfig.FlashUpload = true ;
FCKConfig.FlashUploadURL = FCKConfig.BasePath + 'filemanager/connectors/' + _QuickUploadLanguage + '/upload.' + _QuickUploadExtension + '?Type=Flash' ;
FCKConfig.FlashUploadAllowedExtensions = ".(swf|flv)$" ; // empty for all
FCKConfig.FlashUploadDeniedExtensions = "" ; // empty for no one
FCKConfig.SmileyPath = FCKConfig.BasePath + 'images/smiley/msn/' ;
FCKConfig.SmileyImages = ['regular_smile.gif','sad_smile.gif','wink_smile.gif','teeth_smile.gif','confused_smile.gif','tounge_smile.gif','embaressed_smile.gif','omg_smile.gif','whatchutalkingabout_smile.gif','angry_smile.gif','angel_smile.gif','shades_smile.gif','devil_smile.gif','cry_smile.gif','lightbulb.gif','thumbs_down.gif','thumbs_up.gif','heart.gif','broken_heart.gif','kiss.gif','envelope.gif'] ;
FCKConfig.SmileyColumns = 8 ;
FCKConfig.SmileyWindowWidth = 320 ;
FCKConfig.SmileyWindowHeight = 210 ;
FCKConfig.BackgroundBlockerColor = '#ffffff' ;
FCKConfig.BackgroundBlockerOpacity = 0.50 ;
_________________________________________________________________________________
Here is my config.asp
<%
' FCKeditor - The text editor for Internet - http://www.fckeditor.net
' Copyright (C) 2003-2008 Frederico Caldeira Knabben
'
' == BEGIN LICENSE ==
'
' Licensed under the terms of any of the following licenses at your
' choice:
'
' - GNU General Public License Version 2 or later (the "GPL")
' http://www.gnu.org/licenses/gpl.html
'
' - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
' http://www.gnu.org/licenses/lgpl.html
'
' - Mozilla Public License Version 1.1 or later (the "MPL")
' http://www.mozilla.org/MPL/MPL-1.1.html
'
' == END LICENSE ==
'
' Configuration file for the File Manager Connector for ASP.
%>
<%
' SECURITY: You must explicitly enable this "connector" (set it to "True").
' WARNING: don't just set "ConfigIsEnabled = true", you must be sure that only
' authenticated users can access this file or use some kind of session checking.
Dim ConfigIsEnabled
ConfigIsEnabled = True
' was false
' Path to user files relative to the document root.
' This setting is preserved only for backward compatibility.
' You should look at the settings for each resource type to get the full potential
Dim ConfigUserFilesPath
ConfigUserFilesPath = "/portals/0/forum/"
'was /userfiles/
' Due to security issues with Apache modules, it is recommended to leave the
' following setting enabled.
Dim ConfigForceSingleExtension
ConfigForceSingleExtension = true
' What the user can do with this connector
Dim ConfigAllowedCommands
ConfigAllowedCommands = "QuickUpload|FileUpload|GetFolders|GetFoldersAndFiles|CreateFolder"
' Allowed Resource Types
Dim ConfigAllowedTypes
ConfigAllowedTypes = "File|Image|Flash|Media"
' For security, HTML is allowed in the first Kb of data for files having the
' following extensions only.
Dim ConfigHtmlExtensions
ConfigHtmlExtensions = "html|htm|xml|xsd|txt|js"
'
' Configuration settings for each Resource Type
'
' - AllowedExtensions: the possible extensions that can be allowed.
' If it is empty then any file type can be uploaded.
'
' - DeniedExtensions: The extensions that won't be allowed.
' If it is empty then no restrictions are done here.
'
' For a file to be uploaded it has to fulfill both the AllowedExtensions
' and DeniedExtensions (that's it: not being denied) conditions.
'
' - FileTypesPath: the virtual folder relative to the document root where
' these resources will be located.
' Attention: It must start and end with a slash: '/'
'
' - FileTypesAbsolutePath: the physical path to the above folder. It must be
' an absolute path.
' If it's an empty string then it will be autocalculated.
' Useful if you are using a virtual directory, symbolic link or alias.
' Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
' Attention: The above 'FileTypesPath' must point to the same directory.
' Attention: It must end with a slash: '/'
'
' - QuickUploadPath: the virtual folder relative to the document root where
' these resources will be uploaded using the Upload tab in the resources
' dialogs.
' Attention: It must start and end with a slash: '/'
'
' - QuickUploadAbsolutePath: the physical path to the above folder. It must be
' an absolute path.
' If it's an empty string then it will be autocalculated.
' Useful if you are using a virtual directory, symbolic link or alias.
' Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
' Attention: The above 'QuickUploadPath' must point to the same directory.
' Attention: It must end with a slash: '/'
'
Dim ConfigAllowedExtensions, ConfigDeniedExtensions, ConfigFileTypesPath, ConfigFileTypesAbsolutePath, ConfigQuickUploadPath, ConfigQuickUploadAbsolutePath
Set ConfigAllowedExtensions = CreateObject( "Scripting.Dictionary" )
Set ConfigDeniedExtensions = CreateObject( "Scripting.Dictionary" )
Set ConfigFileTypesPath = CreateObject( "Scripting.Dictionary" )
Set ConfigFileTypesAbsolutePath = CreateObject( "Scripting.Dictionary" )
Set ConfigQuickUploadPath = CreateObject( "Scripting.Dictionary" )
Set ConfigQuickUploadAbsolutePath = CreateObject( "Scripting.Dictionary" )
ConfigAllowedExtensions.Add "File", "7z|aiff|asf|avi|bmp|csv|doc|fla|flv|gif|gz|gzip|jpeg|jpg|mid|mov|mp3|mp4|mpc|mpeg|mpg|ods|odt|pdf|png|ppt|pxd|qt|ram|rar|rm|rmi|rmvb|rtf|sdc|sitd|swf|sxc|sxw|tar|tgz|tif|tiff|txt|vsd|wav|wma|wmv|xls|xml|zip"
ConfigDeniedExtensions.Add "File", ""
ConfigFileTypesPath.Add "File", ConfigUserFilesPath & "file/"
ConfigFileTypesAbsolutePath.Add "File", ""
ConfigQuickUploadPath.Add "File", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "File", ""
ConfigAllowedExtensions.Add "Image", "bmp|gif|jpeg|jpg|png"
ConfigDeniedExtensions.Add "Image", ""
ConfigFileTypesPath.Add "Image", ConfigUserFilesPath & "image/"
ConfigFileTypesAbsolutePath.Add "Image", ""
ConfigQuickUploadPath.Add "Image", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Image", ""
ConfigAllowedExtensions.Add "Flash", "swf|flv"
ConfigDeniedExtensions.Add "Flash", ""
ConfigFileTypesPath.Add "Flash", ConfigUserFilesPath & "flash/"
ConfigFileTypesAbsolutePath.Add "Flash", ""
ConfigQuickUploadPath.Add "Flash", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Flash", ""
ConfigAllowedExtensions.Add "Media", "aiff|asf|avi|bmp|fla|flv|gif|jpeg|jpg|mid|mov|mp3|mp4|mpc|mpeg|mpg|png|qt|ram|rm|rmi|rmvb|swf|tif|tiff|wav|wma|wmv"
ConfigDeniedExtensions.Add "Media", ""
ConfigFileTypesPath.Add "Media", ConfigUserFilesPath & "media/"
ConfigFileTypesAbsolutePath.Add "Media", ""
ConfigQuickUploadPath.Add "Media", ConfigUserFilesPath
ConfigQuickUploadAbsolutePath.Add "Media", ""
%>
____________________________________________________________________________